Frets On The Net

Contact

Updated: 2/1/2015

**I DO NOT SELL COMPLETE TREMOLO SYSTEMS!** NOTE: To all the left handed players out there. I can do lefty versions of every bar I make, so no worries about finding or paying extra just because you're a lefty!

When ordering with a part number, please add G (Gold), GB (Gold brushed) or SS (stainless), or SSB (Stainless Steel brushed). Stainless Steel brushed finish for all bars unless you specify otherwise. For example: If you'd like a Yamaha RM Pro bar in polished Stainless Steel to match chrome, the part number would be: TB-RMPro-SS

Black is only available where noted as I don't have any black plating capabilities. Black paint won't hold up, and powder coating is too thick for the tolerancing of these bars.

Floyd Rose, Ibanez, and JT6 Jackson String Lock Screws

.40 cents each screw HWsc-17

Floyd Rose, Ibanez, and JT6 Jackson String Lock Screws with Allen Wrench

$2.50 a set (3 screws & Wrench) HWscw-17

Kahler "Behind the Nut" String Lock Screws

Kahler "Behind the Nut" String Lock Screws with Allen Wrench

Fender System Series String Lock Replacement Screws

Fender System Series String Lock Replacement Screw with Allen Wrench

Fender System Series, Floyd Rose, Ibanez, and JT6 Jackson Allen Wrench Alone

$1.50 each HWw-1

Kahler "Behind the Nut" Allen Wrench

$1.50 each HWw-2

Washburn Wonderbar 2001 String Lock Screws Only available in Black (example of the string lock)

Black Only .45 cents each Set of 6 for $2.00 HWsc-20

Kahler "Floyd Style" Locking Nut Screws

Kahler "Floyd Style" Locking Nut Screws with Allen Wrench

.45 cents each screw HWsc-18

.45 cents each screw HWsc-19

.45 cents each screw HWsc-23

$2.50 a set (3 screws & Wrench) HWscw-18

$2.50 a set (3 screws & Wrench) HWscw-19

$2.50 a set (3 screws & Wrench) HWscw-23

Original Floyd Rose Special Tremolo Bars These will fit Original Floyd Rose, Floyd Rose Special, and Floyd Rose II tremolos with the socket for the collared style bars. These come with a new socket to install into your bridge plate in case yours is worn. Available in Gold, Chrome, Black, or Black for Left Handed. Black Left Or Right $31.00TB-SFLR-B, 31.00TB-SFLR-BL (*lefty) Chrome -TB-SFLR-C $30.00 Gold TB-SFLR-G $37.00

I can now offer a service that will allow you to mount a modern Floyd Rose Special type tremolo bar with the friction collar built in. The only thing you have to do is remove your old tremolo socket and replace it with the new one that I have modified to fit the hole where your old socket went. Yes the bar is included! Click for Tutorial No more bushings for those of you who do not like them ;o)

Available in Gold, Chrome, and Black. TB-JT6CB (Black) $31.00 each , TB-JT6CG(Gold) $37.00 each, TB-JT6CCS(Silver) $30.00 each or TB-JT6CLB(Lefty-Black) $31.00 each.

Service is now available for the JT6 Jackson Logo'd Tremolos shown below: An example of a JT6 Tremolo:

If you need the Allen wrench (3mm) for the installation, see below ....

If you need the Allen wrench (3mm) for the installation, I have those as well.

$1.00 Each

Fender Tremolo Parts

Fender System II (2) and III (3) Tremolo Bar Conversions If you're tired of looking for a bar for that System 2 or 3, I can help by supplying a modern type Floyd bar that will fit right in the existing hole in the tremolo base plate. These do not lock the trems. There are no modifications that you must make, just unscrew the nuts that are holding in the existing socket and replace it with this one. Click for Tutorial for the System III(3) These should actually work for the Elite and Free Flyte as well but have not tested those yet. If yoiu’re interested in testing one, please let me know. Yes the bar is included!

Chrome Only System II (2) TB-SYS2CS - $30.00 System III (3) TB-SYS3CS - $30.00

If you need the Allen wrench (3mm) for the installation, see below ....

If you need the Allen wrench (3mm) for the installation, I have those as well.

$1.00

Fender System I Tremolo Bars

These are made from solid polished, satin or brushed stainless steel, and will not rust peel or chip. NEW!!! These are also now available in black powder coated- -Stainless Steel for TB-SYS1B $45.00. Picture Coming Soon!

TB-SYS1 - $32.00 Mine are exactly like the original bar and just pop right in.

Please be aware of other companies selling bars for the System one, they are not the correct size and require permanent modification to your tremolo!

Solid Aircraft Aluminum tremolo bar Friction Collar for the Fender System 1 tremolo. These are a direct replacement and a much better upgrade as you do not need a separate tool to tighten the collar. Just tighten up the nicely knurled collar and put the bar where YOU want it! Natural and Black anodized aluminum now available!

$25.00 each HWSYS1FC

Natural Aluminum

Black Anodized Aluminum

System I Trem arm bushings These are the plastic bushing that fits between the round, chrome friction nut and the arm socket in the base plate. Angled side faces up into the Friction Collar. The bushing is the black ring in the photo (right).

$15.00 each HWSYS1FB

Fender System I Stainless Steel Fine Tuners

These are made from solid stainless steel and are not soft and weak.

Fender Elite Bass Stainless Steel Fine Tuners

These have domed thread ends and are made from solid stainless steel and are not soft and weak.

$6.00 each screw HWft-2B

$6.00 each screw HWft-2

Also available in sets of 6 for $28.00

System 1 Fine Tuner and Tremolo Bar Repairs Fine Tuner Repair: If you've found that you have stripped out the threads for your fine tuners, I can easily rethread these with a slightly larger size thread, and provide a fine tuner that will function like new again. I can either do just one, or all 6 for you. The total for this service for all 6 fine tuners would be $45.00 plus the shipping back to you. If you have any questions, I'll be happy to help in any way I can! Tremolo Bar Repair / Conversions: If you have missing or broken parts on your System 1 Tremolo, I can help get you back into action with a conversion service that I provide. I can help you (or do it for you) give your trem new life with a modern Floyd Type Tremolo Bar! Read below if you're mechanically inclined and you're not afraid to use power tools. If you can use a drill and you're comfortable drilling out the tremolo socket hole in your bridge, you won't even have to send the bridge to me. All you have to do is be able to hold your bridge in a suitable vise or clamp and drill out the existing hole to a slightly larger size. Black Left Or Right(Righty Temporarily Unavailable) $31.00TB-SFLR-B, 31.00TB-SFLR-BL (*lefty) - Chrome -TB-SFLR-C $30.00 - Gold TB-SFLR-G $37.00 If you need the Allen wrench (3mm) for the installation, I have those as well. $1.00 Read this if you'd rather have me do all the work for you! If you're not up to the task of doing it yourself, I can do it for you. All that is required is that you send the bridge to me and I'll take care of the rest for you. Cost of the service which includes the bar is $42.00 plus the shipping back to you.

Yes the bar is included!

San Dimas Tremolo Bar Tips

Classic Style tips in Polished Brass And Aluminum $18.00 each

Mid-Point Style tips in Polished Brass And Aluminum $18.00 each

Mid-Point Style tips in Polished Aluminum = JCHMT-4A

Classic Style tips in Polished Aluminum = JCHCT-4A

Mid-Point Style tips in Polished Brass = JCHMT-4BR

Classic Style tips in Polished Brass = JCHCT-4BR

Mid-Point Style tips in Relic'd Brass = JCHMT-4RB

Classic Style tips in Relic'd Brass = JCHCT-4RB

Wasburn Tremolo Bars

Wonderbar Tremolo Bars -These are made from Solid Polished, Satin, or Brushed Stainless Steel, and Polished Hardened Brass (matches gold!). It's better than chrome or gold plating because it will never chip or peel or rust! These are for the Friction Collared style trems only. $30.00 TB-2001

Washburn Wonderbar Tremolo Socket Bushings These are the little black bushings that tighten up the trem arm when turning the "friction" collar around the arm. 1 Required. Angled side faces down into the Tremolo bar socket.

$15.00 HWWFB

The "Non-Collared" Washburn ( SHIFT ) Wonderbar Tremolo I'm now making the tremolo bars for the Early style model of these tremolos where they do NOT use the friction collar, as the bar just screws right in like a Strat. TB-2001NC $30.00

$25.00 each Black Anodized Aluminum HWwfcr-BA Solid Brass HWwfcr-BR

Washburn Fine Tuner Washers This is a set of 6 Black Delrin Washers for the Washburn / Shift 2001 Tremolo. These are the thin black washers that act as cushions for the fine tuners.

$12.00 for the set of 6 pcs TB-FTW.

Frets On The Net Quality custom parts.... ....built just for you.

Lock Nut & String Lock Screws & Wrenches

Washburn Friction collars for the Wonderbar/2001/Shift tremolo are available in Black anodized aluminum or Solid Natural Brass.

Charvel Surfcaster (JT490) Tremolo Bars! These also fit the tremolos on the ST Models These are the hard to find tremolo bars for the JT490 Tremolo and are made from solid polished stainless steel only. Will not rust peel or chip. TB-490 $30.00.

JT490 Tremolo:

"ST" Tremolo:

Replacement screws can be found here

Washburn Wonderbar Base Plate Risers These are milled Risers for the Washburn / Shift 2001 Tremolo. They come in in either 1/16th or 3/32nds thicknesses (or other).

HWWWBP-B 3/32nds $40.00 Brushed Brass

HWWWBP-A 1/16th $18.00 Natural Brushed Aluminum

**NOTE** Lefty bars can only be purchased in Black Chrome

Takeuchi TRS Pro Tremolo Bars

JT6 Replacement Tremolo Bars While these are not genuine Jackson/Charvel Parts,these are a low cost alternative for those who want to do mild tremolo work. These bars do not have much friction, and will “swing” freely in the socket. Unfortunately the upgrade bushings are no longer available. Available in chrome or black plated steel.

Black : TB-EDGBR $12.00 Chrome: TB-EDGCR $12.00